Is the only reason you mod to show off?
- Thread starter gliffy
- Start date
S
SillySider03
Guest
Edited.
Last edited by a moderator:
I modded for a practical reason here. I had an Antec solid steel case (was a very old case). It had a air holds all along the side panels. I attached 2 fans by to the air holes and now the case effectively is kept at a decent temperature, even during the summer when it gets hot.
Tech-Daddy
Tech Monkey
I mod for the satisfaction of knowing that not only is my machine a screamer, but it looks mean and is one of a kind unique.
Kinda like hot rods... some people like sleepers, but I'm a big time fan of the smart and clean hot rod with the OMG! graphics/flames. I originally started modding to gain more airflow, lower temps, and allow for better performance.
It evolved into not just performance enhancing modifications, but the frame of thinking like, "ok, I know how to make it cool, temp wise... how can I make it cool "appearance wise"?
That is how mine have evolved... hth!
Kinda like hot rods... some people like sleepers, but I'm a big time fan of the smart and clean hot rod with the OMG! graphics/flames. I originally started modding to gain more airflow, lower temps, and allow for better performance.
It evolved into not just performance enhancing modifications, but the frame of thinking like, "ok, I know how to make it cool, temp wise... how can I make it cool "appearance wise"?
That is how mine have evolved... hth!
This is a good question.
Why do I mod? Well there are many reasons. I mod to make my case more effective. Also I like things being "my way". The case manufacturer usually does not make the case, the way I would of made it myself. I fix that by modding the case to fit the way I would of built it. I then like showing it off a little when friends come over. So I have all different reasons for modding, and the reason I mod is a little bit of this reason and a little bit of that reason.
Why do I mod? Well there are many reasons. I mod to make my case more effective. Also I like things being "my way". The case manufacturer usually does not make the case, the way I would of made it myself. I fix that by modding the case to fit the way I would of built it. I then like showing it off a little when friends come over. So I have all different reasons for modding, and the reason I mod is a little bit of this reason and a little bit of that reason.
sbrehm72255
Tech Monkey
To make the case mine and not like every othere off the shelf sort of thing. Another reason is just because I can.............
Better cooling performance is another good reason.
Better cooling performance is another good reason.
S
SillySider03
Guest
Edited.
Last edited by a moderator:
sbrehm72255
Tech Monkey
Nothing wrong with a lot of pics, I like pics. A pic is worth a thousand words and they also tend to back-up what you're saying............... Long live a ton of pics.......by the way, I post a ton of pics also...............
Long live a ton of pics.......by the way, I post a ton of pics also...............
maddmaxx
E.M.I.
Hmm a good question that I sometimes have to ask myself after putting in hrs. and hrs. of blood, sweat, and cash. Mostly because I enjoy the entire process of design, and fabrication. The sense of accomplishment I get from a project that is either a unique mod or a "One Off" case is sweet. I mod for myself is the answer.:techgage:
I've only done 2 mods and both were for functionality. I don't consider flashy lights, case graphics, LCD panels, etc, to be modding so much as aftermarket parts. You can buy a Mustang and add the bling, or you can mod it by using a better engine. In the case of the latter, you're altering stock, but the former leaves stock and just gets chicks.
SO, having said that, I mod to increase functionality or add something that's lacking. I add the lights, the LCDs and the other bling cause it's cool to think that my computer looks cooler than yours even if I can't beat you in Halo (though I probably could put up a good fight).
SO, having said that, I mod to increase functionality or add something that's lacking. I add the lights, the LCDs and the other bling cause it's cool to think that my computer looks cooler than yours even if I can't beat you in Halo (though I probably could put up a good fight).
moon111
Coastermaker
Modding is what defines me as a computer enthusiast. I can't afford the latest or greatest hardware, so modding is one way to express that I'm giving it an 'all-out' effort. I've made my own glass window, case-light, bezel, drive-cages, and custom paint. (I'm in the process of cutting up an old aluminum pot for my next mod.) Nothing has been over $5.00 in parts.
Modding doesn't have to be about aftermarket parts. I personally use left-over paint, scrap steel and plastic, old toys, etc. To me, modding is about using artistic talent and craftmanship, not buying stuff.
Modding doesn't have to be about aftermarket parts. I personally use left-over paint, scrap steel and plastic, old toys, etc. To me, modding is about using artistic talent and craftmanship, not buying stuff.
South59
Obliviot
why i Mod
I ,well i wanted to do something differnet then any of the other people in my area of ohio(Cowtown U.S.A.),not many modders here .so this is tops in my area althu it could be much better,Tip:Never buy a Logysis Clear Case,why?hard to clean altu cools dramatically well in spite all of the forums are saying that they run hot i think its more of the location of where its located in your home,dont laugh its my first attempt at (Commercial)modding.
I ,well i wanted to do something differnet then any of the other people in my area of ohio(Cowtown U.S.A.),not many modders here .so this is tops in my area althu it could be much better,Tip:Never buy a Logysis Clear Case,why?hard to clean altu cools dramatically well in spite all of the forums are saying that they run hot i think its more of the location of where its located in your home,dont laugh its my first attempt at (Commercial)modding.
