Hi,
I've have had Freezone Elite for about 2-3 Months... and I've been waiting for reviews to come out so that I can compare my results with others... The only difference is that I don't have MTEC Controller... I have VISTA 64BIT and it is currently not supported so I did not get MTEC Controller. Since I don't have MTEC Controller, I manually set fan speed to High/Medium/Low. I normally set it to Medium... I find that High fan is a bit loud for me...
Checking TechGage review, this is their results:
QX6850 @ 3GHz Room Temp 18C
High fan core#1 20 idle, 51 load. Increase of 31C
CPUZ Core Voltage = 1.280
QX6850 @ 3.66GHz vcore ? Room Temp 18C
High fan core#1 42 idle, 70 load. Increase of 28C
CPUZ Core Voltage = 1.376
Below are my results:
QX6850 @ 3GHz vcore Auto Room Temp 20C
High fan core#1 28 idle, 57 load. Increase of 29C
CPUZ Core Voltage = 1.328v
QX6850 @ 3.66GHz vcore 1.4875 Room Temp 20C
High fan core#1 33 idle, 70 load. Increase of 37C
CPUZ Core Voltage = 1.36v
When I OC my CPU, I raise the multiplier from 9 to 11 and set vcore to 1.4875v. Does anyone know what Author: William Kelley, had set his vcore at ? Judging from his CPUZ core voltage... It may be possibly higher than 1.4875v. I know that all CPU's are not the same.... but I was just curious about his vcore...
My PC configuration is shown below
VISTA 64bit
Asus Striker Extreme
QX6850 @ 3.66Ghz (1.4875v)
4 GB Mushkin Xtreme
Thermaltake ToughPower 850 Watts
EVGA 8800 Ultra GTX
BenQ FP241W
CoolIT Freezone Elite
CM Stacker 830
150GB Gaming Western Digital Rapter 10,000RPM