Search results

drop the memory divider a notch or two to see where the FSB tops out on your mobo. i was able to get 235mhz (mobo limit) at 2.5-2-2 with my pc3200 ballistix.

opteron 144, s393 dfi nf4 ultra-d 2x512mb ocz gold GX (thanks rob ;)) at 293x9 with a 166mhz divider for 240mhz ram speed.. timings 1.5-2-2-6, voltage is 3.2v 6677mb/s 2407mb/s 38.5ns sadly i don't have any socketA hardware with me to test right now. i remember my 2500+ barton +...

you must have that backwards :p the difference between the two are probably negligable... BUT the cooler you keep the ram, the longer it'll last. ;) btw rob, you need different smilies :cool:

that previous guest post was mine. i'm not used to boards that let you post without logging in :p and if it's a fan, it's worth using. i upgraded my 5v'ed 80mm tornado to a quieter 120mm fan, but still moves similar amount of air. without it, i'd probably have to clock back like 10mhz :(

world domination! and if stability is an absolute must, when you find the limit, back off a bit from that, mhz wise.. just to allow for some fluctuations in room temp and stuff that could effect stability if you left it on the edge :D

yup. and common notation for voltage would be 3.0v, or 2.6v ;) my chart is for one stick. i edited it so that it's back up.. my website is going through some major overhauls, so yeah. if you're really new, there's one thing you should keep in mind at all times: GO SLOWLY! don't make any big...

just cause i have had a few brushes with evil people over at dfi street, i will provide my competition :D http://www.hardforum.com/showpost.php?p=1027479689&postcount=2 (basically the same thing though :p) really? that's interesting.. here's how my ballistix does:

hmm, didn't log me in :confused:

yup, in the memory tab, if you have trouble finding it :D also, are you only using test #7 in memtest?

Rob asked me to fill in here, so here goes for my first post. If i put any more than 2.5 volts in whatever the timings are at it errors. hmm, i've seen some people have this issue before. a few questions that could help: which bios are you using? i recommend bios 5/10 -2 for the dfi nf4...