Voltage you run, all the time?

[adabo24]

Voltage you run your socket 939 chip, all the time? According to motherboard monitor, Im running mine at 1.47 volts. What voltage does everyone use?

 

[adabo24]

I meant to stick this post in the overclocking section. Could a moderator please move it there.

 

[Greg King]

Consider it moved.

I run stock 1.4v but either the motherboard monitor display is off or my motherboard is undervolting to 1.36v. Regardless, in BIOS, I am setting pretty at stock voltages for the 3700+ Sandy and I see no need to stray away from that.
:techgage:

 

[MaRm]

My socket 939 is at a nice cool voltage of 1.3 volts. I under-voltage it to keep it cool.

 

[fullpicture]

I run my AMD at 1.5 volts, and this is 24 hours / 7 days a week. I doubt it will ever burn out.

 

[SillySider03]

Edited.

 

[izzie]

AMD 3200+ at 2500 Mhz (250 x 10) stable at 1.45 volt

 

[werty316]

I run my A64 3000+ 1.8GHz @ 1.4V or 2.4GHz @ 1.4V.

 

[skyrise]

I overclock mine to 2.6 GHz and run it at 1.6 volts. Note: I'm on watercooling, which keeps the temp. down, so I can run it at a higher volt.

 

[Worldstar]

I run at 1.4 volts. You do NOT need to put a lot of voltage on an AMD processor to overclock it. The nice thing about AMD is it overclocks well at low heat output.

 

[xstatic]

I use 1.45v. Slight overvoltage of .05 volts. Gives it enough jolt to overclock it to 2.44 ghz.

 

[andanton]

1.5 volts, 24 hours / 7 days a week.

 

[gliffy]

Winchester AMD64 processor. Thermalright XP-90 heatsink. 2.7 ghz. Memory is <b>not</b> running 1:1. Voltage is 1.58 volts.