SLi Overclocking

Jakal · 04-18-2006, 03:57 AM

So far I've been quite lucky as to not have problems running SLi with my Expert board. Reading over the DFi forum led me to believe the Expert was prone to problems with SLi setups. Well now that I've got everything working fine, it's time to push the envelope.

Before, running one card, I was able to get close to 500/1200 without problems. I don't want to push the two cards that much, but I'd like to get 480/1150. Which, I don't think is too much to ask. This leads me to my question. What utility do I have to use to oc the cards in SLi mode?

I've been pouring over forums and questions, and I've come upon RivaTuner time and again. After installing, I was able to read and change the first card, but not the second. It recognized the card, but didn't read the core/mem speeds. Coolbits only allows for the changing of the primary card. It reads the first and second under the temp window, but nothing else.

Any help is very much appreciated!

04-18-2006, 03:57 AM	#1
Jakal Tech Monkey Join Date: Nov 2005 Location: Missiskippy Posts: 634	SLi Overclocking So far I've been quite lucky as to not have problems running SLi with my Expert board. Reading over the DFi forum led me to believe the Expert was prone to problems with SLi setups. Well now that I've got everything working fine, it's time to push the envelope. Before, running one card, I was able to get close to 500/1200 without problems. I don't want to push the two cards that much, but I'd like to get 480/1150. Which, I don't think is too much to ask. This leads me to my question. What utility do I have to use to oc the cards in SLi mode? I've been pouring over forums and questions, and I've come upon RivaTuner time and again. After installing, I was able to read and change the first card, but not the second. It recognized the card, but didn't read the core/mem speeds. Coolbits only allows for the changing of the primary card. It reads the first and second under the temp window, but nothing else. Any help is very much appreciated! __________________ Intel C2Quad Q9400 @3.6Ghz \| Asus PM5Q Deluxe \| OCZ Reaper HPC PC2-8500 8GB \| XFX Black Edition 260/216\| knobs are great for twisting, turning, squeezing and pulling... especially your own..... that's how doors open \| Chaos Havok: grrrr im lagging me \| <@Deathspawner> I wish I was in Windows :-/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How important is overclocking to you?	Rob Williams	Overclocking and Cooling	16	05-28-2010 11:10 AM
Need Overclocking Tips/Help	TheCrimsonStar	Overclocking and Cooling	16	05-27-2010 01:26 AM
Overclocking FSB on P5N-E SLI	Remmo87	Overclocking and Cooling	4	04-17-2008 07:18 PM
Overclocking Help (help please)	Blazedremedy	Overclocking and Cooling	2	12-24-2007 02:19 AM
Best mobo for overclocking	cyborg939	Overclocking and Cooling	4	10-19-2007 01:21 PM