Seasonic Power Angel

Rob Williams · 08-31-2006, 01:41 AM

Gadgets. Any geek worth his salt lives to surround himself with them. Some are useful while some are decorative while others are just...well, odd. Today we take a look at a useful gadget that just might answer some questions the next time you look at your power bill and ask yourself "Where does it all go?"

Read Matts review here and discuss it here!

T-Shirt · 08-31-2006, 12:30 PM

Nice review, answered many of the questions I had about these.
I'm definately adding this device to my "gonna' have to get one (or more) of those " list.

Rob Williams · 08-31-2006, 12:43 PM

I agree. Seems like a fun device to use to see how much wattage your PC really pushes at full load.

08-31-2006, 02:01 PM

The reason that the two did not match was because a purely resistive load was not applied. The resistance of the resistor has nothing to do with the Watts vs PF reading.

A resistor could affect it if it is a wire wound resistor, this would have some inductance and would cause some level of lagging PF. Lagging or leading PF refers to whether the current waveform is lagging or leading the Voltage waveform.

Lagging is as a result of inductance and leading is a result of a capacitive load. capacitive is not the norm, it is usually a lagging PF which is inductive.

Evan

madmat · 08-31-2006, 02:21 PM

Your PF is how the wall sees the load. The more reactive the load the lower the PF. A load with a perfect PF of 1 is a resistive load and the reason behind using PSU's with APFC is to present a load that looks like a resistor rather than one that's dynamic like a capacitive or inductive load.

Just a quick FYI.

T-Shirt · 09-01-2006, 10:08 AM

Quote:

Originally Posted by Rob Williams

I agree. Seems like a fun device to use to see how much wattage your PC really pushes at full load.

My computers would be a place to start, but other items that only run intermitantly (computer room A/C, refridgerator, home entertainment center, etc) could use a power audit too.
I can read a devices specs and calculate it maximum theoretical draw, but that's not what it actually uses in the real world
I even though of using 2, one on the input of the UPS, and one on the output/computer load to give me a better idea of the real power useage in a typical day/week/month.

09-01-2006, 01:48 PM

How quick is the update on the wattage draw?
How many data points does it avg?
Does it show peak wattage draw?

Asking questons for could reasons...

Lets say I turn on a laser printer....peak wattage would nice to be seen
Peak wattage draw on a computer....maybe running a game shows i'm using 250w, but really i'm spiking 275w occasionaly....

madmat · 09-01-2006, 02:57 PM

I'd say it updates 2 or 3 times a second and no, there's no peak memory. I imagine it'll show up to 1888 watts which is the point where it'll blow the fuse

12-24-2006, 05:20 PM

Is there a way to determine the high and low voltages recorded over a period of time?

In other words, I want to know how well my UPS is managing the power. How low or how high did the voltage go over the period of time that I left it running.

Or do I just have to watch it?

Is there another way to do this? A diff gadget?

Thanks,

Jay

madmat · 12-24-2006, 08:06 PM

A different gadget perhaps or maybe videotaping it but it doesn't average or record high/low voltages. It does record the total KW/Hr but that's it. I wish it did what you're asking about though for the very same reason.

Rob Williams · 12-24-2006, 09:26 PM

I wonder why they don't have that functionality to begin with? That would be a wicked gadget :\

Rory Buszka · 12-26-2006, 08:13 PM

I don't think this gizmo should have received a '10' rating. True, it does everything it's supposed to, but the ultimate gadget for this application would actually be an oscilloscope with a PC input, for measuring things like transient demand and the shape of the AC waveform from the wall.

madmat · 12-26-2006, 08:30 PM

That won't tell you squat about the overall power consumption of whatever you're testing. It'll just tell you the amplitude of the waveform and the waveform shape. Just who cares about that besides geeks? No-one, besides, the Power Angel runs $30 or so, an O-Scope runs $200 and the Stingray runs $250. I have both of those sitting on my desk and without the Power Angel I can't tell you a thing about the efficiency of a PSU. The right tool for the job and an O-Scope, while interesting to watch, is not it for measuring the draw of an electronic device.

08-31-2006, 01:41 AM	#1
Rob Williams Editor in Chief Join Date: Jan 2005 Location: Atlantic Canada Posts: 8,921	Seasonic Power Angel Gadgets. Any geek worth his salt lives to surround himself with them. Some are useful while some are decorative while others are just...well, odd. Today we take a look at a useful gadget that just might answer some questions the next time you look at your power bill and ask yourself "Where does it all go?" Read Matts review here and discuss it here! __________________ Intel Core 2 Quad Q9450 @ 3.20GHz, ASUS P5K Premium WiFi-AP, OCZ 8GB PC2-6400, EVGA GTX 285 1024MB Seagate 500GB, 750GB & 1TB, Pioneer 22x ODD, Corsair 1000HX, Thermalright Ultra-120, CM Storm Sniper Dell 2408WFP 24", ASUS Xonar Essence STX, Ultrasone PRO 750, Gentoo Linux (KDE 4.3.2, 2.6.31 Kernel) "Take care to get what you like, or you will be forced to like what you get!" - H.P. Baxxter Profiles: Last.fm \| Xbox Live \| Steam

08-31-2006, 12:43 PM	#3
Rob Williams Editor in Chief Join Date: Jan 2005 Location: Atlantic Canada Posts: 8,921	I agree. Seems like a fun device to use to see how much wattage your PC really pushes at full load. __________________ Intel Core 2 Quad Q9450 @ 3.20GHz, ASUS P5K Premium WiFi-AP, OCZ 8GB PC2-6400, EVGA GTX 285 1024MB Seagate 500GB, 750GB & 1TB, Pioneer 22x ODD, Corsair 1000HX, Thermalright Ultra-120, CM Storm Sniper Dell 2408WFP 24", ASUS Xonar Essence STX, Ultrasone PRO 750, Gentoo Linux (KDE 4.3.2, 2.6.31 Kernel) "Take care to get what you like, or you will be forced to like what you get!" - H.P. Baxxter Profiles: Last.fm \| Xbox Live \| Steam

08-31-2006, 02:01 PM	#4
Unregistered Guest Poster Posts: n/a	Watts vs PF reading The reason that the two did not match was because a purely resistive load was not applied. The resistance of the resistor has nothing to do with the Watts vs PF reading. A resistor could affect it if it is a wire wound resistor, this would have some inductance and would cause some level of lagging PF. Lagging or leading PF refers to whether the current waveform is lagging or leading the Voltage waveform. Lagging is as a result of inductance and leading is a result of a capacitive load. capacitive is not the norm, it is usually a lagging PF which is inductive. Evan

08-31-2006, 02:21 PM	#5
madmat Former Editor Join Date: Jun 2005 Location: Kennesaw GA Posts: 1,639	Your PF is how the wall sees the load. The more reactive the load the lower the PF. A load with a perfect PF of 1 is a resistive load and the reason behind using PSU's with APFC is to present a load that looks like a resistor rather than one that's dynamic like a capacitive or inductive load. Just a quick FYI. __________________ M2N32-SLI Deluxe, Brisbane X-2 4000+ @ 2986Mhz 2x1 gig OCZ PC26400 Platinum EVGA 7950GT SLI Buncha drives, Some other stuff, Even more stuff, If the automobile had followed the same development cycle as the computer, a Rolls-Royce would today cost $100, get a million miles per gallon, and explode once a year, killing everyone inside. --Robert X. Cringely, InfoWorld magazine Sign Me!

09-01-2006, 02:57 PM	#8
madmat Former Editor Join Date: Jun 2005 Location: Kennesaw GA Posts: 1,639	I'd say it updates 2 or 3 times a second and no, there's no peak memory. I imagine it'll show up to 1888 watts which is the point where it'll blow the fuse __________________ M2N32-SLI Deluxe, Brisbane X-2 4000+ @ 2986Mhz 2x1 gig OCZ PC26400 Platinum EVGA 7950GT SLI Buncha drives, Some other stuff, Even more stuff, If the automobile had followed the same development cycle as the computer, a Rolls-Royce would today cost $100, get a million miles per gallon, and explode once a year, killing everyone inside. --Robert X. Cringely, InfoWorld magazine Sign Me!

08-31-2006, 12:30 PM	#2
T-Shirt E.M.I. Join Date: Mar 2006 Posts: 95	Nice review, answered many of the questions I had about these. I'm definately adding this device to my "gonna' have to get one (or more) of those " list.

09-01-2006, 01:48 PM	#7
Unregistered Guest Poster Posts: n/a	How quick is the update on the wattage draw? How many data points does it avg? Does it show peak wattage draw? Asking questons for could reasons... Lets say I turn on a laser printer....peak wattage would nice to be seen Peak wattage draw on a computer....maybe running a game shows i'm using 250w, but really i'm spiking 275w occasionaly....

12-24-2006, 05:20 PM	#9
JR PC Tech Guest Poster Posts: n/a	Hi Low range Is there a way to determine the high and low voltages recorded over a period of time? In other words, I want to know how well my UPS is managing the power. How low or how high did the voltage go over the period of time that I left it running. Or do I just have to watch it? Is there another way to do this? A diff gadget? Thanks, Jay

12-24-2006, 08:06 PM	#10
madmat Former Editor Join Date: Jun 2005 Location: Kennesaw GA Posts: 1,639	A different gadget perhaps or maybe videotaping it but it doesn't average or record high/low voltages. It does record the total KW/Hr but that's it. I wish it did what you're asking about though for the very same reason. __________________ M2N32-SLI Deluxe, Brisbane X-2 4000+ @ 2986Mhz 2x1 gig OCZ PC26400 Platinum EVGA 7950GT SLI Buncha drives, Some other stuff, Even more stuff, If the automobile had followed the same development cycle as the computer, a Rolls-Royce would today cost $100, get a million miles per gallon, and explode once a year, killing everyone inside. --Robert X. Cringely, InfoWorld magazine Sign Me!

12-24-2006, 09:26 PM	#11
Rob Williams Editor in Chief Join Date: Jan 2005 Location: Atlantic Canada Posts: 8,921	I wonder why they don't have that functionality to begin with? That would be a wicked gadget :\ __________________ Intel Core 2 Quad Q9450 @ 3.20GHz, ASUS P5K Premium WiFi-AP, OCZ 8GB PC2-6400, EVGA GTX 285 1024MB Seagate 500GB, 750GB & 1TB, Pioneer 22x ODD, Corsair 1000HX, Thermalright Ultra-120, CM Storm Sniper Dell 2408WFP 24", ASUS Xonar Essence STX, Ultrasone PRO 750, Gentoo Linux (KDE 4.3.2, 2.6.31 Kernel) "Take care to get what you like, or you will be forced to like what you get!" - H.P. Baxxter Profiles: Last.fm \| Xbox Live \| Steam

12-26-2006, 08:13 PM	#12
Rory Buszka Super Moderator Join Date: Nov 2006 Location: Indianapolis, Indiana Posts: 440	I don't think this gizmo should have received a '10' rating. True, it does everything it's supposed to, but the ultimate gadget for this application would actually be an oscilloscope with a PC input, for measuring things like transient demand and the shape of the AC waveform from the wall. __________________ Rory Buszka

12-26-2006, 08:30 PM	#13
madmat Former Editor Join Date: Jun 2005 Location: Kennesaw GA Posts: 1,639	That won't tell you squat about the overall power consumption of whatever you're testing. It'll just tell you the amplitude of the waveform and the waveform shape. Just who cares about that besides geeks? No-one, besides, the Power Angel runs $30 or so, an O-Scope runs $200 and the Stingray runs $250. I have both of those sitting on my desk and without the Power Angel I can't tell you a thing about the efficiency of a PSU. The right tool for the job and an O-Scope, while interesting to watch, is not it for measuring the draw of an electronic device. __________________ M2N32-SLI Deluxe, Brisbane X-2 4000+ @ 2986Mhz 2x1 gig OCZ PC26400 Platinum EVGA 7950GT SLI Buncha drives, Some other stuff, Even more stuff, If the automobile had followed the same development cycle as the computer, a Rolls-Royce would today cost $100, get a million miles per gallon, and explode once a year, killing everyone inside. --Robert X. Cringely, InfoWorld magazine Sign Me!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Selecting a Power Supply	O Nemesis 0	General Hardware	30	06-26-2007 11:57 PM
7600GT AGP Power	linnerd40	Video Cards and Displays	2	04-28-2007 10:17 PM
2,000W Power Supply anyone?	Rob Williams	General Hardware	9	02-24-2007 12:26 PM
Power Supplies	SgtSethiol	General Hardware	16	11-29-2005 03:47 PM
Power Supply	Will Nave	General Hardware	6	06-09-2005 02:25 PM